Blue Sheer Curtains for Sliding Glass Doors Bed Bath and Beyond

With a little help from a friend, I successfully removed and replaced my sliding glass doors, saving a boatload of money along the way.

Sliding Glass Door Installation

For older homes, it may be necessary to replace existing sliding glass doors due to age, disrepair, or energy efficiency. For ambitious homeowners, taking the do-it-yourself route can be a great way to save money.

There are four main steps in the process of replacing a sliding glass door:

Selecting a replacement door
Removing the existing door, doorframe and threshold
Installing the new door
Sealing the new sliding glass door.

These instructions guide you through the replacement process using a vinyl sliding glass door as an example.

Note: Replacing a sliding glass door will require at least two people to remove the existing door and install the new door.

You will need the following equipment and tools to replace your sliding glass door:

Tape measure
Level or other straight edge
Drill
Pry bar
No. 8 wood screws (3-inch)
Phillips head screwdriver
Flathead screwdriver
Pliers
Razor blade
Reciprocating saw
Circular saw
Miter saw
Safety goggles
Rubber mallet
Expanding foam sealant for windows and doors
Silicone window and door caulk (weatherproof)

Warning: Follow the manual's safety precautions when operating power tools and saws. Failure to do so could result in bodily injury. Always wear safety goggles, work gloves, and proper footwear to reduce the risk of injury.

Selecting a Replacement Door

After deciding to replace your sliding glass door, you will want to determine the material of the replacement doors. You will also need to determine the level of energy efficiency you want that corresponds to your budget. Before purchasing a replacement door, be sure to measure the existing sliding glass door, doorframe, and threshold.

Types of Sliding Glass Doors

Typically, sliding glass doors are constructed of aluminum, wood, vinyl, fiberglass, or foam core. To choose which material is right for your home, consult a sliding glass door retail specialist or manufacturer. These instructions use a vinyl sliding glass door as an example.

Determining Energy Efficiency

Not only will energy-efficient sliding glass doors help with your utility bills and reduce your carbon footprint, you can also receive a tax credit. The National Fenestration Rating Council (NFRC) rates each product based on the energy performance of the product. New products will have an NFRC rating label that includes ratings for energy performance characteristics to help you determine which product to buy.

For a sliding glass door to be considered energy-efficient, it must have a high-performance glaze. Most sliding glass doors are double paned with a low-emissivity (low-e) coating that qualifies as energy efficient.

Fenestration products (windows, doors, and skylights) are rated based on their solar heat gain coefficient (SHGC) and U-factor. The SHGC is the ratio of the solar heat gain entering a space through the fenestration product to the incident solar radiation, measuring how well the product blocks heat from the sun. The SHGC is expressed as a value between 0 and 1. The lower the SHGC, the less solar heat is entering a space.

Scroll to Continue

Energy Efficiency Criteria by Glazing Level

Source: ENERGY STAR, http://www.energystar.gov/index.cfm?c=windows_doors.pr_taxcredits
Glazing Level	U-Factor	SHGC
Opaque	≤ 0.21	Any
1/4 or 1/2 Lite	≤ 0.27	≤ 0.30
3/4 or Full Lite	≤ 0.32	≤ 0.30

Score around the edges of weather stripping and drywall.

How to Remove Sliding Glass Doors

Step 1: Remove the Existing Doorframe and Threshold

Remove all door treatments (curtains or blinds) from around the existing sliding glass door before replacing the door. You may want to put a tarp on the surrounding floor or on nearby furniture to minimize any debris being tracked through your home.

Step 2: Prepare the Existing Sliding Glass Doorframe and Threshold

Using your razor blade, score the drywall and cut the weather stripping around your existing sliding glass doorframe and threshold. Scoring will give a clean breaking point to help prevent damage to surrounding drywall you want to maintain.

Step 3: Prepare the New Sliding Glass Doorframe and Threshold

Most new sliding glass doors will come with a thin plastic strip (mounting strip) around all edges of the frame. If you are replacing an existing sliding glass door and the trim cannot be removed, remove the mounting strip. To remove the mounting strips, use your razor blade to score along the bottom edge and bend forward and backward using pliers until you are able to snap it completely off.

Use a razor to score the plastic strip. Use pliers to bend and snap it off.

Remove screws holding door panel in place.

Step 4: Remove the Existing Sliding Glass Door Panels and Screen Door

Sliding glass doors have two panels: one that is movable (the sliding door) and one that is stationary. If your existing door has a screen door as well, remove it first by lifting the door up and off the bottom track and then out towards you to remove the screen door from the tracks.

Before removing the stationary door panel, check for any screws holding the door panel in place. If there are screws holding the panel in place, use your drill to remove the screws. Use a pry bar move the side of the panel door from against the wall so you can grip both sides of the panel. Lift the door panel up and off the bottom track and then out towards you to remove the door panel from the tracks.

To remove the sliding door panel, lift the door up and off the bottom track and then out towards you to remove the door panel from the top track.

Lift up and off the bottom track, then towards you to remove from the top track.

Pry the doorframe and threshold from the door opening.

Step 5: Remove the Existing Doorframe and Threshold

To remove the existing doorframe and threshold, first remove any screws or nails holding the frame to studs of the wall. Once the screws or nails are removed, use your pry bar to pry the doorframe and threshold from the door opening.

If you are unable to pry the doorframe out, use a reciprocating saw to cut through the center of the top part of the doorframe. Carefully, start from the cut part of the doorframe to collapse the existing frame and threshold inward using pliers.

Carefully pull out the existing doorframe and threshold.

Step 6: Prepare the Door Opening for the New Sliding Glass Door

Measure the opening of the doorway and new sliding glass door to determine if the new doorframe will be thicker than the removed doorframe. If the new sliding glass door is thicker than the existing doorway opening:

Measure the width necessary in the doorway opening and mark the walls and flooring that needs to be removed.
Score drywall along the marked line around the doorway opening.
Note: You may need to score two or three times to score deep enough to cleanly break the drywall.
Break off the drywall you wish to remove by placing the edge of the pry bar underneath the exposed edge of the drywall. At the same time, apply pressure to the drywall you want to maintain to prevent cracking.
Remove the drywall and any debris in the path of the new sliding glass doorframe.
Remove any flooring in the path of the new sliding glass doorframe using a circular saw for hardwood or laminate flooring, a razor blade for carpet, or a wet tile saw with a diamond blade for ceramic tile.
Warning: Always wear proper safety gear when operating power tools and saws to prevent injury.
Remove any remaining dust or debris from around the doorway opening.

Measure and mark flooring and drywall to be removed,

How to Install a New Sliding Glass Door

Before installing the new sliding glass door, remove the sliding door panel from the doorframe until after the doorframe has been installed. The stationary panel should remain intact.

Use a rubber mallet to tap doorframe into place.

Screw each corner and center of the doorframe to secure.

Step 1: Install the New Doorframe

Situate new doorframe so that the track for the sliding door panel is facing the interior of the home and the track for the screen door and stationary door panel is facing the exterior. To install the doorframe into the doorway opening:

Lift the doorframe into place and use a rubber mallet to tap the doorframe into the doorway opening.
Using shims to level the doorframe if needed, insert a No. 8 wood screw (3-inch) into each corner of the doorframe.
Insert a No. 8 wood screw (3-inch) into the center of each vertical side of the doorframe.

Lift door panel up and into the top track; push the panel up and away to place on bottom track.

Step 2: Inserting the Sliding Door Panel

Insert the sliding door panel by lifting the door panel up and into the top track. Push the door panel up and away from you to place the bottom of the door onto the bottom track. After any necessary wheel adjustment, the door panel should then be able to slide horizontally.

Lift screen door up and into the top track; push the screen up and away to place on bottom track.

Step 3: Insert the Screen Door

Insert the screen door the same way as the sliding door panel by lifting the screen door up and into the top track. Push the screen door up and away from you to place the bottom of the door onto the bottom track. The screen door should then be able to slide horizontally.

Step 4: Install Door Handles and Locks

Install door handles and locks using the instructions that came with the new sliding glass door.

Sealing the New Sliding Glass Door

To prevent any damage due to weather and to prevent hot and cold air from entering or exiting your home, seal around the doorframe using expanding foam caulking and weatherproof silicone caulking. Apply the expanding foam caulking in any large gaps around the interior and exterior of the doorframe. Allow the expanding foam to cure before removing any excess.

Note: Refer to instructions on the expanding foam caulking container for curing times.

Apply expanding foam caulking in any gaps around the doorframe.

Apply silicone caulking to seal the edges of the doorframe.

Apply weatherproof silicone caulking around the edges of the exterior of the doorframe to completely seal the edges of the doorframe.

Once all caulking has cured, you can install decorative molding and window treatments around the sliding glass door.

This article is accurate and true to the best of the author's knowledge. Content is for informational or entertainment purposes only and does not substitute for personal counsel or professional advice in business, financial, legal, or technical matters.

Lacey Taplin (author) from Colorado Springs, CO on March 02, 2015:

Thanks for reading! Good luck on your project.

Faythe Payne from USA on March 01, 2015:

This is good to know..We are planning to replace our slider very soon

Lacey Taplin (author) from Colorado Springs, CO on October 08, 2014:

Thanks for the feedback, Hailey. I'm so glad my article was helpful in your DIY adventures.

Lacey Taplin (author) from Colorado Springs, CO on July 24, 2013:

Thanks for your feedback. At first we weren't sure what to do with the tabs either, but we then realized they were meant for new installation and didn't need them for replacement doors. Best of luck with that tile!

John on July 23, 2013:

Thanks for the instruction. Removing the entire tabs if your a doing a retro is good info. I just completed my install prior to reading your article and wish I knew that it was ok to remove the fins. I thought the door just wasn't deep enough or something. I have other issues because my tile is in the way but I think it will turn out good. Thanks again.

Lacey Taplin (author) from Colorado Springs, CO on May 01, 2013:

Thank you for your feedback!

Tammy from North Carolina on May 01, 2013:

Excellent tips! I would find this to be a bit intimidating, but your instructions are easy to follow. This is useful information from selecting a door to installation. Welcome to Hubpages! You are off to a great start.

perezgoetted.blogspot.com

Source: https://dengarden.com/home-improvement/How-to-Replace-a-Sliding-Glass-Door